Installation Instructions
Vinyl Inspirations believes that everyone deserves an excellent product. We manufacture your expression using state of the art equipment and the highest quality matte vinyl available. Your satisfaction is completely guaranteed or you will receive your money back. Use the following steps to install your Vinyl Inspirations lettering.
Lettering must be applied to a DRY and CLEAN surface. For best results apply at room temperatures. Lettering will not stick to overly rough or textured surfaces.
Step 1:
Lightly pencil the exact center of your Vinyl Inspirations lettering using a measuring tape or ruler. You may want to find the center of the wall or area you wish to install your lettering on as well.
Step 2:
Install your quote by pulling off the thick backing paper at a 45 degree angle. Your lettering should adhere to the transfer tape. (If your lettering is not adhering to the transfer tape, simply lay the tape back onto the backing paper and rub with the installation tool provided free with your order.)
Step 3:
Place the transfer tape up on the wall matching the center points. Use a level to make sure your lettering is straight. You can reposition the transfer tape as many times as you like BEFORE you rub the letters into place. Once you have the transfer tape and lettering in the exact place you wish, rub the transfer tape and lettering with the installation tool provided free with your order. (Do not use sharp items like a metal putty knife.) SLOWLY remove the tape from the wall at a 45 degree angle and watch to make sure the letters sick to the wall. If not, lay the tape back down and rub again with the installation tool provided free with your order.
